Wheels

In order to answer the call from Nairo Quintana and the other champions, Campagnolo created the Bora Ultra 35: perhaps the best wheel out there in terms of performance both while climbing and on mixed routes. The Bora Ultra's innovative AC3 (All Conditions Carbon Control) Technology means maximum safety when braking in any condition, providing shorter stopping distances and excellent braking modulation. And, thanks to its wide, aerodynamic profile, differentiated hub diameter, and CULT bearings, all cyclists can now enjoy the same performance Campagnolo provides its Pro-Tour champions. - 35mm carbon profile offers maximum lightness and aerodynamics - Designed for domination uphill and on the flats - CULT bearings deliver up to nine times the smoothness of standard bearings and are designed to resist oxidation, preserve performance over time - Carbon rim and hubs ensure good stiffness and extremely low weight - Aerodynamic profile spokes slice through the air - Exclusive G3 spokes ensure better balancing of the traction force on the wheel, drastically reducing all its stress - Weight: 1,360 grams

Innovating the wheel that for years has been a market benchmark might have seemed difficult and risky, but the Campy Tech Lab designers have managed to maintain those characteristics of flexibility and ease of handling that have made this high-profile wheel easy to steer, high performing and safe. The Bora Ultra 50 bursts onto the market not only with introduction of the new tire bed dedicated to the clincher, but also with improvements to the previous version in terms of lightness, aerodynamics, stiffness and comfort thanks to use of the new wider rim and front and rear hubs with different diameters. The 2018 range sees the addition of the new AC3 (All Conditions Carbon Control) Technology braking track, which brings braking safety on wet terrain closer to that on dry. Plus, extremely clean-cut aesthetics guaranteed by innovative water-transfer graphics. All without giving up on the extreme smoothness, which has become the market benchmark and is the result of use of CULT bearings. - 50mm Full Carbon rim guarantees the best quality available on the market - Long-lasting smoothness is ensured by CULT bearings, nine times better performing than a standard solution - Internationally one-of-a-kind AC3 technology guarantees unique performance by the Bora Ultra 50 also when braking - Excellent grip between brake pad and rim allows for gradual, constant braking and shorter stopping distances, even in wet conditions - Dedicated brake pads (red compound) guarantee reliability and durability - Aerodynamic spokes, wider profile, carbon hubs, CULT bearings, self-locking aluminum nipples, oversize flanges and much more - The distinctive G3 design of the rear wheel guarantees excellent stiffness and an unmistakable look - Weight: 1,435 grams

Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 35 wheelset is where it's at. The 35mm deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the aluminum hubs house USB hybrid ceramic bearings for a zippy ride. Plus, the Boras come with Campy's legendary quick-releases, too. - 35mm carbon rim means greatly reduced weight - Clincher version ensures easier bike maintenance and management - The rim has exactly the same structure as that of top-of-the-range wheels - The aluminum hubs and ceramic USB bearings ensure performance at a lower price - Its 35mm high rim gives this wheel good performance on long stretches on the flat where even the aerodynamic factor is important - All the Campagnolo know-how in the field of carbon makes this wheel lightweight and perfect for longer steeper climbs - Wheel is for tubular tire only - Weight: 1,170 grams

Zipp’s first product almost three decades ago was a disc wheel. It’s at the heart of their heritage. Now, Zipp is pioneering the next generation of disc wheel, the Super-9 Disc-brake Disc. The Super-9 Disc itself, handmade at Zipp's factory in Indianapolis, USA, optimizes supreme aerodynamics, power transfer, stiffness, lightweight and durability.The Super-9 disc has an unassuming profile. It borrows from the perimeter shape that makes the Sub-9 so fast it can actually generate forward lift, but in place of the Sub-9's toroidal bulge, the Super-9 remains flat from its widest point all the way to the hub. This relatively simple-looking shape results in a wheel that's as fast as the Sub-9 but stiffer than any other Zipp disc. Braking on modern time trial and triathlon bikes often has been a challenge. The superior performance of disc brakes changes all that with greater stopping power and more precise speed modulation, all with less hand effort than required by traditional brakes. That means greater confidence in corners, descents, and on technical courses. The disc brake version of the Super-9 disc retains the light weight of its rim-brake counterparts. - Includes: Aero Stainless Steel Black Quick Release, 10-speed hub spacer, Platinum Pro EVO Brake Pads, Valve Extender, Valve Adaptor, Valve Decal

Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.

Campagnolo has developed a totally reworked disc brake version of the Bora One that transfers skills and knowledge gained in years of experience and introduces a new logic and innovative technologies to ensure unprecedented results. The Bora One Disc Brake is the most sophisticated carbon wheel on the market and one of the few specifically designed for disc brake systems. It is extremely light yet stiff, resistant to shock and perfectly balanced: a versatile wheel for any kind of route. - Use of resins and materials that guarantee superior finish and good UV resistance - Designed specifically for disc brake systems - Lightweight uphill thanks to its 35mm rim - Smooth and safe downhill thanks to its USB bearings - The layers of carbon are hand positioned to ensure the perfect equilibrium of weight and performance - Monolithic aluminum hubs optimize disc braking torque - Weight: 1483 grams

Shimano's Dura-Ace C60 Carbon Tubular disc-brake wheelset provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular - Center-lock Disc - E-thru axles

Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 35 wheels are where it's at. Their 35mm deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the aluminum hubs house USB hybrid ceramic bearings for a zippy ride. Plus, the Boras come with Campy's legendary quick-releases, too. - 35mm carbon rim means greatly reduced weight - Clincher version ensures easier bike maintenance and management - The rim has exactly the same structure as that of top-of-the-range wheels - The aluminum hubs and ceramic USB bearings ensure performance at a lower price - 35mm high rim gives this wheel good performance on long stretches on the flat where even the aerodynamic factor is important - All the Campagnolo knowhow in the field of carbon makes this wheel lightweight and perfect for longer steeper climbs - Number of spokes: 18 Front, 21 Rear - RDB – Rim Dynamic Balance - Bladed aerodynamic spokes - Stainless steel spokes - Ultralinear/DRSC geometry - Aluminum nipples - Weight: 1405 grams Included: - Special brake pad kit for carbon wheels (red compound): 40% better braking performance in wet conditions and 20% in dry. - New Quick Release wheels with a totally redesigned aerodynamic profile, lighter and with a shiny finish. - Valve extender

The legendary Campagnolo Bora One 50 is not just for the pros. Features of this wheel are the height of its rim, capable of winning while sprinting with Greipel or racing uphill with Valverde, a new width that ensures comfort, stiffness, reactivity and cutting-edge aerodynamic performance, 3Diamant finish on the braking track for powerful, modular braking, exclusive G3 spokes combined with external nipples for always efficient maintenance, different diameters on front and rear hubs with cone/cup system and USB bearings that offer the Bora one 50 rider a smoothness that is however superior to traditional systems. All this makes it the ideal choice for competitive cyclists at any level and, from today, also for amateurs thanks to the arrival of the clincher version. - 50mm carbon rim ensures the best aerodynamics and light weight - G3 spokes offer the best balance for traction forces, guaranteeing top power transmission - Aerodynamic profile spokes ensure maximum air penetration - Aluminum hubs with ceramic USB bearings guarantee performance and maximum durability - 3Diamant technology guarantees top braking performance for a carbon wheel, for improved safety and easier use - Clincher version guarantees the cyclist all the convenience of an easy-maintenance tire - Carbon rim structure ensures lower weight - Brake pads with dedicated compound (red) ensure safe modular braking - Weight: 1,485 grams

Shimano's Dura-Ace C60 Carbon Tubular wheelset provides improved rigidity thanks to a wide flange hub and offset rim so you can reach that next level of aerodynamic performance. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim

Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth, and no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the Roval 321 Disc for disc brakes turns conventional design on its head, creating the fastest wheel on the planet. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the length of the course. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field-testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a never-before-seen shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss Ready right out of the box and comes with a padded wheel bag, quick-release, and tubeless valve stem. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Full carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc 142x12mm, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval tubeless valve, Roval valve pocket covers - Weight: 1015g

Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth. And no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the 321 disc turns conventional design on its head, creating the fastest wheel available. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the long haul. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a new-to-category shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss-Ready out of the box and comes with a padded wheel bag, quick-release, tubeless valve, and SwissStop Black Prince brake pads. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval steel quick-release, Roval tubeless valve, SwissStop Black Prince brake pads, Roval valve pocket covers - Weight: 1000g

The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles

The lightweight Dura-Ace C40 Carbon Tubular wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim

The CLX 64 Track Tubular was brought to life under the Allez Allez team at the 2016 Red Hook Crit. Along these lines, you get all of the unrivaled aero performance of the CLX 64, albeit with DT Swiss track hubs and Aerolite spokes, for a stiff, smooth, and most importantly, fast ride on the boards. One of the first questions we get about the CLX 64 is, “Why 64mm instead of 65mm?” To put it simply, it's because 64mm tested faster than 65mm. One millimeter—that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two-years of development, 80 variations in rim design, and nearly 300 hours of Win Tunnel testing time studying tire and frame interactions, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that’s nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel “slow” due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort.

The lightweight Dura-Ace C40 Carbon Tubeless disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubeless - Center-lock Disc - E-thru axles

What you're looking at here is gravity's nemesis: Roval's Control SL 29 Wheelset 148. At 1,330 grams, you'll climb XC courses with ease on these lightweight, hookless-bead, carbon hoops. They're built to withstand grunting up climbs, descending with abandon, and blasting in and out of corners with Specialized carbon rims, DT Swiss spokes, and DT Swiss's legendary 240 rear hub internals. The Boost spacing offers increased width on the front and rear hub flanges, and in turn, increased frame and fork clearance and stiffness. This combines to deliver a more durable wheel system at a minor weight penalty. Plus, these sweet race-ready wheels are tubeless-compatible so you are ready for anything that the trail throws at you.

The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.

Whatever road you choose, the ERC 1100 DICUT delivers the best performance. The benchmark Aero+ concept developed with DT's partner SWISS SIDE generates maximum speed and unparalleled handling characteristics. The guts of this outstanding wheel are its innovative components, being assembled with regard on every small detail. These wheels leave you with no excuses and give you even more reasons to get out and ride — wherever the road may take you.

The punchers wheel: The medium-profile aero rim, partly bladed spokes, and lightweight build make it easy to flow with the pack and launch your punchy attack when the time is right. Even in the harshest weather conditions the ARC 1100 DICUT 48 will lead you rapidly to the line. Combining carbon know-how with SWISS SIDEs leading aero knowledge, this wheel epitomizes lightweight and low drag. The aero hub design, featuring straight pull nail-head spokes and SINC ceramic bearings, make it stiff and smooth rolling — just right to surprise the lead-out train.

Aero meets All-around: The ARC 1100 DICUT 62 is ridden by DT Swiss athletes in long distance triathlons, as well as in flat stages of the Tour de France. Adding to it's versatility is the Aero+ concept: It is the category leader when it comes to low drag numbers but at the same time it is easy to handle in every wind situation. Hubs equipped with SINC ceramic bearings and ultra-lightweight components throughout are there to make you roll smooth and fast, no matter if you're fighting against the wind on your time trial bike or trying to escape the bunch on the final meters to the line.

If going flat out fast is what you want, then this wheelset has all the details covered. DT's top triathletes choose the ARC 1100 DICUT 80 when it's race day. It's developed in partnership with aerodynamics specialists SWISS SIDE and equipped with SINC ceramic bearings to get up to speed and stay there. Supporting the complete system of the rider and bike with minimal drag and unparalleled handling under all conditions, riding fast is guaranteed. Finally the precision wheel build with high and even spoke tension gives you the reliability to dominate all of the 180 km.

Gravity's grasp just got a little weaker. With Roval's Control SL 29 Torque Tube Wheelset coming in at an impressive 1,440 grams, you'll climb with ease. The lightweight, 30mm-wide carbon rims respond almost telepathically to accelerations, changes in direction, and the ins and outs of the trail. To add durability to the mix, DT Swiss's legendary 240 rear hub internals, SRAM's super-stiff Torque Tube front hub, and DT Swiss spokes make these wheels as ready for epic miles as they are light. And for versatility, the rear hub is compatible with a standard 135mm quick-release or a 142mm thru-axle. Please note: The front wheel only fits RockShox's RS-1 fork and the wheelset has a rider weight limit of 240 pounds.

The Roval Control SL 29 Torque Tube wheels are nearly identical to the "standard" Control SL 29s, with the only exception being at the front hub. For this wheelset, the front hub features a SRAM Torque Tube design that's intended for use exclusively with the RockShox RS-1 fork. Again, it's not compatible with any other fork. However, if you're running an RS-1, you'll get hand-built, ultralight carbon perfection with a Zero Bead Hook design. This design pairs perfectly with tubeless tires, while also increasing both strength and impact-resistance. Meanwhile, the rims have been laced via DT Swiss Competition spokes to strong alloy hubs with DT Swiss 240 internals (rear only) that serve-up lightening-fast engagement and acceleration.

After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found—until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 50mm - Rim Width: 20.7mm internal, 29.4mm external - Front Spoke Pattern: Two-cross/Radial (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Nipple Type: DT Swiss Pro LockBrass hexagonal - Front Hub: Roval AFD1, Centerlock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Rear Hub: Roval AFD2, Centerlock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Assembly Method: Hand-built - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release & 12mm endcaps, Rear quick-release & 142x12 thru-axle endcaps - Total Wheelset Weight: 1,515g

After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found—until the CL 50 was developed, that is. We paired our quiver-killing CLX 50 rim with DT Swiss Competition round spokes, our Aero Flange hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1465-gram clincher wheelset that's race-ready and wallet-friendly. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: 50mm - Rim Width: 20.7mm internal, 29.4mm external - Front Spoke Pattern: Radial - Rear Spoke Pattern: Radial/Two-cross (2:1) - Spoke Count: 16 front, 21 rear - Spoke Type: DT Swiss Competition Race T-head - Nipple Type: DT Swiss Pro LockBrass hexagonal - Front Hub: Roval AF1, sealed cartridge bearings - Rear Hub: Roval AF1, sealed cartridge bearings, DT Swiss 350 internals, 11-speed - Assembly Method: Hand-built - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, SwissStop Black Prince brake pads

While the CLX 32 rim is the lightest and most aero in its category, there's much more to it than that. It’s a durable, 2Bliss Ready, and wide-profiled carbon rim that’s ready to take on any adventure. Because of this, we developed the CLX 32 650b Disc wheelset. We wanted to create a lightweight wheel that works well with plus-sized tires—one that could also be used on anything from tarmac to gravel. And yes, while many opt to use mountain bike wheels for this application, there are various advantages to choosing the CLX 32 650b Disc. First off, while most mountain wheels have hubs that are convertible to various axle standards, not many are convertible to the 12mm road thru-axle standard. Secondly, mountain wheels often come with either a SRAM XD driver, a Shimano 11-speed mountain, or 10-speed road freehub, making them incompatible with contemporary 11-speed road cassettes. And lastly, most mountain wheels use standard six-bolt disc brake hubs, rather than the Center Lock hubs found on most road applications. With a 21mm internal width, however, the CLX 32 650b Disc features an inner width that’s consistent with many XC-oriented mountain bike wheels, so it pairs well with 650+ road and gravel tires. And with the 42-47mm tires associated with 650+, the tire and rim interaction is equally as important as the tire itself—too narrow of a rim and you’re left with an overly-rounded profile; too wide and the tread is too squared off. In either situation, you're going to get poor handling characteristics. Each CLX 32 650b Disc set also uses the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, and tubeless valves. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 32mm - Rim Width: 20.7mm internal - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 24 - Spoke Type: DT Swiss Aerocomp (L)/Aerolite (R) T-head - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AFD2, Centerlock, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Assembly Method: Hand-built - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve,142x12mm thru-axle & quick-release end caps - Wheelset weight: 1290g

The WCS Apex 50 pierces the wind, is stiff in a sprint, and tough enough to last. The tubeless design and wider rim are a perfect combination for low tire pressure cyclocross racing in the slop or everyday road riding on nice, manicured tarmac. Phantom Flange hubs offer the sleek profile and direct-drive efficiency of straight-pull spokes, but still use stronger, tried-and-true J-bend spokes for maximum performance and reliability. WCS Apex wheels are the result of an unceasing pursuit of innovation, decades of deep cycling heritage, and unprecedented cycling experience. Not only do these wheels perform with precision, they look amazing. - 19mm wide internal rim profile for increased sidewall support when using larger tires Tubeless rim design - Premium quality sealed bearings and patented 6 pawl, 12-point microclutch engagement system - Load-specific bearings: 28mm drive side, 24mm non-drive - Tubeless carbon clincher rims - Rim depth: 50mm - Outer rim width: 26mm - Inner rim: 19mm - Hubs: WCS Phantom Flange - Freehub: alloy - Freehub options: Shimano/ SRAM - Axle Compatibility: Standard QR9 (front) Standard QR10 (rear) - Ritchey forged quick releases included - Spokes: DT Aero Comp (Front: 20 spokes / Rear: 24 spokes) - Front Lacing: Radial - Rear Lacing: 2X drive side / radial non-drive side - Nipples: Brass 2.0 - Matte UD carbon finish - Shimano/SRAM-compatible brake pads included - Front: 726g - Rear: 902g - Hand-built

The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.

The new standard in modern day, high performance cross ccountry wheel sets. Coming with a generous 25mm wide hookless full carbon and tubeless-ready rim, the XRC 1200 SPLINE 25 strikes the perfect balance between low weight and aggressive riding readiness. The lean, CNC machined hubs are super-light while the 25mm tall rim has the inherent stiffness necessary for efficient riding and to precisely hold a line. Together with the renowned DT Swiss build quality, this wheel is what everyone looking to go fast up and down has been waiting for.