Parts

Without wires or cables, SRAM designed a simpler way to shift with the nearly flawless RED eTap, and now, the intuitive simplicity of the eTap system is available with the added performance of hydraulic road disc brakes (HRD). The SRAM RED eTap HRD shift-brake control offers the world’s first wireless drivetrain with SRAM's most advanced HRD platform yet, HydroHC. Simpler shifting, better braking—all in the name of true advancement. - Easy to install on any frame; compatible with all SRAM road 22 speed cranks, cassettes and chains. - Includes two 160mm Centerline two-piece six-bolt rotors In the Box: - Red eTap Front Derailleur w/ Battery - Red eTap Rear Derailleur w/ Battery - Red eTap HRD Right Shifter with Caliper - Red eTap HRD Left Shifter with Caliper - eTap Battery Charger and Power Cord - USB Stick and QuickStart Guide

- Air sprung with adjustable negative coil spring - Twin Tube open bath cartridge damper with Bottom Loader compression unit - Rebound, high and low speed compression external adjustability - Threadless aluminum steerer with 42mm 7000 series aluminum upper tubes - Carbon Torsion Arch increases stiffness by 25% - 36mm lower legs with forged magnesium 20x110mm dropouts - 74mm Post-Mount, 203mm disc brake only

25 years after the original RS-1, the fork that revolutionized mountain biking, RockShox does it again. A chassis design never seen before, which integrates the fork's steerer tube, crown and legs into a single carbon mainframe. The all-new Accelerator Damper, which combines incredible small bump performance with an ultra-efficient lockout. And Predictive Steering, a reimagined interface between hub and dropouts which enabled us to create an inverted fork light enough for XC racing and stiff enough for trail riding. - TRAVEL: 80/100/120mm - WHEELS: 27.5-inch, 29-inch - AXLE TO CROWN: 487mm - 27.5-inch/100mm travel, 507mm - 27.5-inch/120mm travel, 486mm - 29-inch/80mm travel, 506mm - 29-inch/100mm travel, 526mm - 29-inch/120mm travel - WEIGHT: 1646g - 27.5-inch, 1666g - 29-inch - DAMPING: Accelerator with Dig Valve and Rapid Recovery rebound tune - AVAILABLE SPRINGS: Solo Air - ADJUSTMENTS: XLoc remote (lockout and floodgate) and Beginning Stroke rebound - STEERER OPTIONS: Tapered carbon - CROWN: Carbon - UPPER TUBES: 32mm aluminum, Fast Black - LOWERS: Carbon - MAXIMUM ROTOR SIZE: 200mm - COLOR OPTIONS: Diffusion Black, Gloss Black, Gloss White - REMOTES: XLoc Sprint, XLoc Full Sprint - OTHER: Brake Type: Disc, Axle: Predictive Steering w/Maxle Ultimate (hub sold separately), Fork Offset: 42mm (27.5-inch), 46mm/51mm (29-inch)

Step up to the next generation in shifting with SRAM's wireless RED eTAP electric road drivetrain kit. Each kit contains: - SRAM RED eTAP shift/brake levers - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide

RS-1 harnesses 25 years of creativity, refinement, and the courage to tackle the biggest engineering challenge of mountain bike suspension to date: the inverted chassis. The Dig Valve provides the optimal level of control for both low and high speed compression, carefully controlling the oil flow to provide the rider with the right amount of support and impact absorption. The RS-1's Rapid Recovery rebound circuit allows the fork to recover faster between consecutive bumps, letting the wheel track the ground with greater precision, aided by the Fast Black coating on the lower tubes that reduces stiction, friction, and related afflictions. - Requires the use of a Predictive Steering Hub or Wheel (Not included) with Torque Tube. Will not work with "Boost" 15x110 hubs - Tune air spring progressiveness with the use of Bottomless Tokens, which thread into the top caps - Crown Race: 40mm - Offset: 51mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 29/27.5" - Maximum Tire Width: 62mm

Step up to the next generation in shifting with SRAM's wireless RED eTAP electric aero drivetrain kit. The aero kit includes Blip shifters, derailleurs, battery charger and USB stick. Brake levers not included. Each kit contains: - 4x SRAM eTAP 650mm Blip remote shifter buttons - SRAM eTAP Blip Box - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide

Pioneer's full crankset power meters are simply some of the best power-monitoring systems on the planet. The Pioneer Shimano Dura Ace 9000 crankset is your chance to ride the same technology used by the world's best riders, ensconced in one of the most aesthetically pleasing cranksets ever created. Pioneer's created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, in real time, allowing you to analyze and adjust your technique on the fly. At the heart of the Pioneer Power Meter System are two streamlined strain gauge monitors that detect the slightest tangent and radial-force direction as power is applied to the crank arms. This proprietary system detects the amount and direction of force at 12 different points in each pedaling stroke for each leg, letting you fine-tune your pedaling to find race-winning form. With advanced technology accurate to +/- 2%, ANT+ transmitting, and active temperature compensation, the Pioneer power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. - Standard: 53/39 - Mid-Compact: 52/36 - Compact: 50/34

Pioneer's full crankset power meters are simply some of the best power-monitoring systems on the planet, and Pioneer's Shimano Ultegra 6800 crankset is your chance to ride the same technology used by the world's best riders. Pioneer's created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, in real time, so you can analyze and adjust your technique on the fly. At the heart of Pioneer's Power Meter System are two streamlined strain gauge monitors that can detect the slightest tangent and radial force direction as power's applied to the crank arms. This proprietary system detects the amount and direction of force at 12 different points in each pedaling stroke for each leg, allowing you to fine-tune your pedaling to find race-winning form. With advanced technology accurate to +/- 2%, ANT+ transmitting, active temperature compensation, Pioneer's power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. - Standard: 53/39 - Mid-Compact: 52/36 - Compact: 50/34

FSA’s Road PowerBox Carbon Crankset employs a P2M convertible spider design for multiple chainring options. FSA's hollow carbon arms and BB386EVO spindle mated together produce a very lightweight, extremely versatile power meter crankset available with a double chaining configuration. Software upgrades are available for even more features. - Hollow carbon arms with UD carbon finish - BB386EVO 30mm AL 7050 alloy spindle fits every frame (purchase BB separately) - AL7075 CNC chainrings - AL7075 Torx T-30 alloy chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Spider-based power sensors provide total power output measurement of both legs, with Left & Right leg output analysis available with system upgrade - Bluetooth connectivity available with system upgrade - Battery life is approximately 300-400 hours - Easy-to-replace CR2450 battery

When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DFour measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DFour represents the state of the art in power meter technology. Every innovation in Quarq’s next-generation DZero platform is channeled into the DFour Power Meter Crankset. It embodies 10 years of Quarq technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets. - The DFour power meter is a bolt-on upgrade for Shimano’s 11-speed Dura-Ace 9000, Ultegra 6800 and 105 5800 drivetrains. - Must be paired with a compatible SRAM bottom bracket. - ELSA RS power meter owners can upgrade using the DFour Power Meter Spider. - Free firmware upgrades with the Qalvin app. - Compatible with BB30 bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation.

The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. The Dual Position Air changes fork travel up to 30mm without changing small bump performance: switch from climbing like a demon to bombing downhill with confidence. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - OneLoc Remote actuated open/lockout adjustment - Crown Race: 40mm - Offset: 51mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29" , 27.5+ - Maximum Tire Width: 81mm

The Ohlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Ohlins has increased the stanchions to 36mm and upped the spacing to 110mm while retaining the ultra-stiff alloy unicrown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy unicrown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 15x110mm spacing makes it compatible with most 29-inch and 27.5+ setups.

Introducing the Cane Creek Helm, a 7-way adjustable suspension fork optimized for 140mm to 170mm of travel. Born in the mountains of Western North Carolina, Helm is designed to conquer aggressive trail, enduro racing, and anything in between. By isolating each damping and air spring adjustment, the Helm has the ability to be tuned for all types of terrain and riding styles and gives the rider ultimate control of their suspension set-up. WEIGHT - 2070 grams DAMPING - High Speed Compression, Low Speed Compression, Low Speed Rebound ADJUSTMENTS - 7-way adjustable suspension fork - High speed compression - Low speed compression - Low speed rebound - Air volume adjust (8-position Internal indexed system) - Independent positive air spring - Independent negative air spring - Indexed travel adjust system SPRING - High volume positive and negative air springs STANCHION DIAMETER - 35mm TRAVEL - Positioned at 150mm, 160mm, or 170mm from factory Optimized for 140 - 170mm of travel TRAVEL ADJUSTMENTS - Internal, 10mm Increments (170mm down to 100mm) 2 Travel spacers included AXLE / SPACING / OFFSET - "D-Loc" 15mm thru axle system / 15mm x 110 BOOST spacing / 44mm

Coil confidence is being rediscovered by endure riders all over the world. Fork chassis weight and overall bicycle weight has decreased over the last few years, allowing the return of faithful coil sprung suspension products. Helm Coil is optimized for 130mm to 160mm of travel, with the ability to be internally adjusted by changing the location of the spring perch (coil piston) on the travel-indexed compression rod. This procedure requires no additional parts. - D-Loc Axle Assembly: Hard anodized aluminum cam lever closes against a self-lubricating brass clamp washer for axle function longevity - Fast and easy keyed entry axle and lock system - Eliminates unwanted rotational and torsional axle forces * A spring is required for this shock. Spring Recommendations: 35lb spring - AAG0421 RED - (90-120lbs rider) 45lb spring - AAG0422 BLACK - (120-160lbs rider) 55lb spring - AAG0424 GREEN - (160-200lbs rider) ** Stock Spring in Helm Coil 65lb spring - AAG0426 BLUE - (200-240lbs rider) With changes in internal travel amount, rider positioning on the bicycle, bicycle head angle, and rider ability/style, spring rates will vary. For assistance please contact Cane Creek or your nearest Certified Service Center.

The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - OneLoc Remote actuated open/lockuot adjustment - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 27.5" , 27.5+ - Maximum Tire Width: 81mm

The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - OneLoc Remote actuated open/lockuot adjustment - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29" , 27.5+ - Maximum Tire Width: 81mm

The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.

When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and, for the carbon version, compatibility with BB386EVO bottom brackets. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Material: CNC Machined Aluminum Spider, Exogram Carbon Crank Arms - Accuracy: 1.5% - Bolt Circle Diameter: 130 BCD, 110 BCD - Q-Factor: 145mm - Wireless Technology: ANT+, Bluetooth low energy technology - Battery: CR2032, 200 hours of riding time - Weight: 578/559 grams (130/110 BCD) - Head Unit Compability: ANT+ and Bluetooth low energy technology compatible head units (available separately) - Compatibility: Traditional 5 bolt chainrings from most manufacturers. Hidden (HB) and Non-hidden Bolt (NHB) patterns. 10-speed, 11-speed, 1X and 2X. *Not compatible with Campagnolo chainrings

Manufactured in Spain from 7055 aluminum through state-of-the-art CNC-machining, Rotor's INpower 3D+ is a single-leg power meter crankset that reports metrics through user-friendly software. Seamlessly integrated inside a compact crank axle, the INpower 3D+ 110 BCD is protected from shocks, crashes, and outside contaminants, plus it allows you to maintain your bike’s sleek, elegant aesthetics. Equipped with the MAS spider for greater tuning options when used with Rotor OCP rings. - Equipped with 4 strain gauges in the spindle that reports power, cadence, Torque 360, OCA, left side pedal smoothness and left side torque effectiveness - Transmits wirelessly via ANT+ 2.4 - 100% machined CNC, Al 7055 T6

The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately

The RockShox SID World Cup has one focus—winning XC performance. The chassis and internals have been optimized for 100mm of travel and the one piece carbon crown and steerer tube cut every gram available. To tame the increasing demands of today's race courses the SID now features the Charger Damper in a purpose built XC tune with a firmer lockout for intense climbs. - An updated SID chassis drops weight and adds stiffness - Features the Charger Damper with Rebound, Lockout and low-speed compression adjustment - More tuning options with dedicated 100mm Solo Air spring - Features a 1 piece carbon fiber crown-steerer - OneLoc remote compatible - Factory tuned Dig Valve – mid-stroke support - Crown Race: 40mm - Offset: 42mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Maximum Tire Width: 81mm

This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)

With only 8 hidden marine grade bolts controlling 6 simple points of adjustment, this elegant full carbon integrated aerobar system can easily fine-tune to the millimeter to fit any type of rider. The Aeria T4 is designed with a lower profile in the wind to create less drag with shallow-bend T4 extensions for a more aggressive ride position with relaxed wrist angle. It features an aerodynamic wing with six points for adjustment and integrated bracket that clamps. - Aerodynamic Carbon Wing: UCI Compliant 3:1, aerodynamic full carbon fiber wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Stackable Risers: Slim, sleek risers fine-tune armrest/extension height to get a perfect blend of aerodynamics, power and comfort. - Integrated Bracket: Lightweight, simple and easy to adjust, the patent-pending bracket system simultaneously clamps the extensions while attaching the brackets to the wing. This design yields a smaller profile in the wind, creates less drag, and minimizes corrosion issues from exposed bolts. - F-35c Carbon Armrest: 3x fore/aft positioning, providing 30mm of adjustment while also allowing for 15° (+/- 7.5°) of rotation adjustment to angle armrests for a customized fit. - T4+ Carbon Extensions: The high-performance shallow ski-bend T4+ Carbon extension offers a single neutral wrist angle with a low extension height for better aerodynamics. Tech Specs: - Armrest: F-35c Carbon Armrest - Stack: 55mm-135mm (highest stack available of any Profile Design model) - Reach: -60mm, -40mm, -30mm or -10mm with the bracket flipped - Extension Adjustment: 150mm-305mm (T4+ Carbon extensions) - Extension Drop: 0mm - Width: 42cm (center to center) - Center Clamp Diameter: 31.8mm - Armrest Width: 155mm-203mm - Weight: 663g

The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - Three position compression adjuster (Open/Pedal/Firm) with Low Speed compression adjustment in the Open position - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 27.5" , 27.5+ - Maximum Tire Width: 81mm

The RockShox Lyrik gets a Charger 2 damper, which reduces overall weight, increases bump-sensitivity and traction, and reduces the force needed to turn knobs and lock in the best setting for the terrain. And since today’s enduro riders demand ultimate pedaling efficiency, the new Lyrik is remote compatible, which allows for on-the-fly compression control. And, the DebonAir air spring increases small bump sensitivity and mid-stroke support, making the Lyrik better at tracking terrain with greater stability in rock gardens and rougher trail. - Charger 2 damper is lighter, more bump-compliant, and has more easily adjustable knobs - Updated air pressure guides maximize performance for E-MTB applications - Fast Black coating on the upper tubes provides improved durability and decreased friction - Three position compression adjuster (Open/Pedal/Firm) with Low Speed compression adjustment in the Open position - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29", 27.5+ - Maximum Tire Width: 81mm

RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.

The RockShox SID World Cup has one focus—winning XC performance. The chassis and internals have been optimized for 100mm of travel and the one piece carbon crown and steerer tube cut every gram available. To tame the increasing demands of today's race courses the SID now features the Charger Damper in a purpose built XC tune with a firmer lockout for intense climbs. - An updated SID chassis drops weight and adds stiffness - Features the Charger Damper with Rebound, Lockout and low-speed compression adjustment - More tuning options with dedicated 100mm Solo Air spring - Features a 1 piece carbon fiber crown-steerer - OneLoc remote compatible - Factory tuned Dig Valve – mid-stroke support - Crown Race: 40mm - Offset: 42mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Maximum Tire Width: 100 x 15mm - 62mm; 110 x 15mm - 81mm

The RockShox SID World Cup has one focus—winning XC performance. The chassis and internals have been optimized for 100mm of travel and the one piece carbon crown and steerer tube cut every gram available. To tame the increasing demands of today's race courses the SID now features the Charger Damper in a purpose built XC tune with a firmer lockout for intense climbs. - An updated SID chassis drops weight and adds stiffness - Features the Charger Damper with Rebound, Lockout and low-speed compression adjustment - More tuning options with dedicated 100mm Solo Air spring - Features a 1 piece carbon fiber crown-steerer - OneLoc remote compatible - Factory tuned Dig Valve – mid-stroke support - Crown Race: 40mm - Offset: 51mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Maximum Tire Width: 100 x 15mm: 62mm; 110 x 15mm: 81mm

SRAM's WiFLi technology accommodates a wider range of gears than a standard short-cage road derailleur. Compared to a triple chainring setup, it provides faster shifts and significant weight savings. Easy to install on any frame; compatible with all SRAM road 22-speed cranks, cassettes and chains. - For riders who already own Red eTap with a short cage rear derailleur and want to switch to a wide range cassette - Includes Medium Cage Rear Derailleur 11-32 Red 11 Speed Cassette and XG-1190 Red 22 Chain

Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth