Cycling Shoes

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced toungless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features-Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Feast your eyes on the all new Garneau Tri Air Lite Shoes. LG took their best-selling Tri-400 shoe and gave it all the upgrades you could ever imagine. Some would even call it space grade, and we guarantee it’ll get you from T1 to T2 cooler, faster, stronger, and way more comfortable than anything you’ve ever seen. Technical Details: - Shoe Technology : Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 8.3 oz/235 g - What's Included: Shoe bag included - Outsole: Patented Carbon Air Lite composite extremely ventilated outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Closure System: Boa L6 micro-adjustment, Hook and loop straps: Easy to adjust

The Garneau Klondike M3 Cycling Boot offers ultimate protection and keeps feet warm on long winter rides. - High volume fit last - Cordura 1680D with 400 g ThinsulateTM to resist cold temperatures down to -20°C/-4°F - Boa® IP1 with silicone elastic and neoprene opening with YKK zip - VIBRAM® DURATREK outsole - 3-layer construction insole with felt, 3 mm PE and foil

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort

The new S-Works 7 Lace takes the performance of the winningest road shoe in the world and combines it with laces to create one of our most supple and adaptable uppers for next-level fit. Paired with our Body Geometry technology for optimum foot, knee, and ankle alignment, going fast never looked so good. By utilizing laces, the shoe offers 12 separate points of tension adjustment to dial in the perfect hold across the entire foot, while the removal of plastic hardware allows the engineered mesh upper to adapt to more foot shapes for a sublime, supple fit. The S-Works 7 Lace fits like a leather glove, but you know, for your foot and made of engineered mesh and carbon. But laces have more to bring to the party. The removal of plastic hardware also shaves considerable weight. One size 44 S-Works 7 Lace weighs a feathery 236 grams, so you’ll be looking good and feeling good when the road points uphill. The foundation for all this is the technology pioneered for the S-Works 7. Our Powerline carbon outsole—our lightest and stiffest outsole ever—creates the ideal platform for power delivery. Our PadLock heel comfortably holds the rear of your foot, while the engineered mesh upper delivers a stable yet supple hold for all-day power delivery. Whether you’re looking for a relaxed coffee ride shoe, a lightweight climber, or a supple and adaptive fit that compliments your race shoe, the S-Works 7 Lace marries classic style to race-winning heritage and performance. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Non-stretch laces provide even hold across the entire foot that stays consistent all ride long. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0. - Engineered mesh is combined with no-stretch TPU zones for the ultimate connection and comfort. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximately 236g per shoe (size 44)

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, "What shoes are those?" - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

No matter if your feet are thin, medium or wide, Garneau's X-Comfort zone technology prevents numbness by extending the shoe's edges if needed. Having an internal lace system and a tight opening on the shoe's top avoids mud from sticking into the Baryum's fastening system. Get the best of both worlds with a stiff carbon outsole covered in rubber for optimal grip in any conditions. Heels and toes are protected with extra reinforcements so that you can head to the craziest trail sections with confidence. Technical Details - Shoe Technology: Dual X-Comfort Zone and Power Zone technologies - Shoes Weight: 12.7oz / 360g (size 42) - Outsole: Carbon and rubber outsole - Insole: Ventilated IceFil Transfo 3D insole with 3 adjustable arches - Heel Retention: HRS-100 reinforced with 0.6mm membrane: Better heel positioning and reduced loss of power - Closure System: Boa L6 micro-adjustment

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is "yes" to all of the above. With the S-Works 7 Road, you get shoes with no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to our lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn’t stretch when pulled on, making sure that your foot stays where it’s supposed to. With these all features combined, you can be sure that we’ve kept in line with the motto “every watt is sacred.” In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC’d alloy Boa dials also add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything we know about footwear, compacted into one shoe with no compromises and no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

Made for winter hikes, snowshoe adventures, and long, cold days outdoors, the adidas Terrex winter boots are waterproof and fully insulated. COLD.RDY with PrimaLoft® wraps your foot in heat-sealing warmth, while RAIN.RDY seals out slush, snow, and rain to keep feet dry all day long. A BOA® Fit System lets you dial in a precise fit for confident footing. A BOOST midsole cushions and brings energy to every step, on and off the snow and in all temperatures. The Stealth winter grip rubber provides high-friction traction for confident footing on slick, icy ground. - BOA® Fit System for micro-adjustment, effortless on-and-off, and secure, consistent hold - Designed to insulate your body in cold weather — stay warm with adidas COLD.RDY - Waterproof textile upper with molded toe cap and external heel clip - PrimaLoft® Parley insulation keeps your feet warm all-day - adidas BOOST delivers incredible energy return and instant comfort with each step to keep you going

Pro-level Tri racing shoes designed to shorten transitions and optimize power transfer. Synthetic Leather Lighter, stronger and more durable than natural leathers External Heel Cup External curved heel cup suppresses foot twist and roll Quick Straps For fast triathlon transitions Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats - T1-Quick strap and extra-wide upper opening simplify and speed up transitions - Lightweight, rigid carbon fiber composite sole efficiently transfers power - Water-resistant microfiber synthetic leather with strategic venting - Breathable 3D mesh breathes great and dries fast - External heel cup stabilizes heel - Large heel loop is easier to grab

Good for the mud, good for stones, the Garneau Mudstone shoes have a flat outsole that's great for riding and walking around the trails, with a recessed insert that's compatible with all styles of SPD cleats. Great for Mountain Biking, Fat Biking, or any conditions when water and cold are present. The Mudstone Shoes have an extra insulated toe box with a high volume fit last, so you can wear thick socks without having to size up. They're fully waterproof with a three-layer construction using synthetic leather and a neoprene sealed cuff for better protection. BOA IP1 dial is easy to adjust while riding with gloves, and the Ergo Grip II outsole provides excellent traction in wet walking conditions. - Shoe Technology: "EEE" last specially designed for a higher volume, perfect for wearing thicker socks in cold temperatures - Closure with reversed hook and loop strap allows for fast transitions - Ergo Grip 2 outsole with removable studs provides excellent traction for walking and configured to maximize mud clearing - 3 layer construction with felt, 3mm PE, and foil to block the cold from the outsole - Boa IP1-S two-way micro-adjustment for easy replacement with hook and loop strap - Front opening with sealed zip prevents infiltrations - 435g (size 42) - SPD cleats fit all major MTB pedals - Cleats sold separately

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

Millennium 4 Carbon Composite Sole. ? Caliper Buckle two-way ratchet for easy on-bike adjustment with incremental tightening and loosening. ? Adjustable Soft Instep Closure System and padded tongue eliminate pressure points. ? High Security Velcro® won’t shift or slip. ? Breathable, supple and durable vented Technomicro microfiber upper with cooling mesh panels.

Ragnarök Tall is the remedy for cool and wet conditions. Our shoulder-season performance shoe features a waterproof membrane and tall neoprene cuff to regulate moisture and keep out mud and grit. End uncomfortable rides with Ragnarök’s unrivaled weather protection. - A redesigned opening makes Ragnarök easy to put on and take off, and a floating three-finger overflap allows riders to dial in the perfect fit - Ragnarök’s real rubber outsole has an aggressive tread for walking in mud and features a 2-bolt cleat mount - Tall neoprene cuff keeps debris out - Easy on and off - Floating three-finger overflap allows the BOA laces to tighten where they need to for an optimal fit - Imported

The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Mega last, men's EE-EEE width, precise fit.

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

This is one of our best sellers across all Collections. It was designed by Louis Garneau himself after suffering a lot during the 1984 Los Angeles Olympics because he couldn’t find any technical shoes on the market at the time. And we’ve continued to improve it year after year since then. With a perfect racer fit, the carbon sole maximizes the energy transfer on the pedal and the sleek lines fit the foot perfectly while the perforated inner sole keeps you cool. We’ve thought of everything! Read the technical sheet, you’ll be impressed too. Technical Details: - Technology: RACER FIT: High-performance fit reduces stack height to pedal - Integrated X-Comfort Zone technology with better stretch - Outsole: Patented Carbon Composite outsole - Insole: COOLMAX®: Moisture-wicking, breathable, and ventilated - Closure System: Boa Li2: mechanism generates higher power with finer resolution - Cleats: SPD-SL compatible with 3 bolt